FF
Product Details
Product Specifications
| SPECIFICATIONS | |||
| Model | 412FF | 414FF | 417FF |
| Web Width (Max mm) | 1,250 | 1,450 | 1,700 |
| Printing Length (10mm Pitch) | 300-750 | 300-750 | 400-960 |
| Printing Width (mm) | 1,200 | 1,400 | 1,650 |
| Printing Speed (Max m/min) | 250 | 150 | |
| Number of Color | 4 ※ | ||
| Web Diameter (unwinder) (Max mm) | 1,200φ(※※PE/PP Printing 1,100φ) | ||
| Web Diameter (rewinder) (Max mm) | 1,200φ(※※PE/PP Printing 1,100φ) | ||
| Drying System | Gas, electricity or steam | ||
| Inking System | Select either two rollers or doctor blade | ||
| Printing Materials | Paper basis weight: 50-120 g/㎡ PE/PP film thickness: 0.02-0.08mm | ||
| Dimensions ※※※ （L×W×H） （m） | 9.0×4.8×3.6 | 9.0×5.0×3.6 | 9.0×5.3×3.6 |
Product Dimensions
Product Details
| ||
| 414FF + 114FF | 4 colors printing. | |
| 414FF + 114FF | Maximum printing width is 1,400mm. There are 1,200mm and 1,700mm elsewhere. | |
| 414FF + 114FF | with over-coating of water-soluble varnish or with over-coating of anti-ultraviolet rays measure | |
| 414FF + 114FF | Maximum over-coating width is 1,400mm. There are 1,200mm and 1,700mm elsewhere. | |
OUR PRODUCTS
This is a stack type flexographic printing press for printing on one side in either 2-color or 3-color print and can be used in combination with a winding machine. It is best suited for printing craft paper which is most commonly used for square bottom (SOS) bags, even in line with a bag making machine. This machine is much more economical than the conventional gravure printing machine.
● The control panel uses a touch panel for easy operation. ● It features a compact design that emphasizes operability and has a neat appearance. ● Uses a winding motor with winding diameter calculation and tension feedback methods to achieve high-precision winding tension control. Additionally, it can now run at maximum speed from the minimum winding diameter. ● The motor is used to move the plate frame, significantly shortening the forming time. ● Each color printing unit is mounted on a separate movable frame. Individual settings can be adjusted and printing plates can be replaced even during the printing process. ● Each printing plate shaft is equipped with a scale for easy print matching. ● The cross step length of the feed and take-up sections is low, improving the ease of paper jointing. ● The gear system uses helical gears to achieve a higher level of printing quality. (Barcode support is also available)
FZ400 has been designed as a stack type press equipped with a sliding frame unit of plate cylinder section. The salient feature is a quick and easy process to adjust impression and to re-fix plate cylinders. Operators may pull the plate cylinder section out and, facing to plate cylinders, are able to clamp a plate onto a cylinder and adjust the clamping position. Operators certainly can make the most of Gear Trains which has been remarkably improved and control mechanisms to maintain stable tension. You may kick-start, discontinue and change speed with far greater range but still, you are assured of a vivid resolution. Even an instantaneous stoppage is possible. Touch Panel An easy-to-use operator interface that provides clear display of operational functions as well as various data for input.
You can contact us in the
following ways！
E-mail:
Address: Room 606-1, 6/F, Block 13, No. 79 Jinshan East Road, Suzhou High-tech District, Suzhou, China
Tel:
NEWLONG Would Love To Hear Your Thoughts
NEWLONG
Headquarters address:Room 606-1, 6/F, Block 13, No. 79 Jinshan East Road, Suzhou High-tech District, Suzhou, China
