FZ400
Product Details
Product Specifications
| Specifications | |
| Model | FZ400 |
| Number of Colours | 4 |
| Print Area (Width) | Max.1220mm |
| Print Area (Length) | 20-43" (508-1092.2mm) 〔0.5"Step〕 |
| Paper Width | Max.1320mm |
| Paper Roll Diameter | Max.1200mm |
| Paper Density | 60-110g/㎡ |
| Print Speed | Max. 180m/min |
Product Size
Product Details
- Remote Control Device puts differential gear into action (motor driven) in order to vertically align and adjust the print image in four process colours.
- Web Scanner to be installed after the fourth printing unit provides still imaging for monitoring.
- Quick Reverse Function for manual cleaning so as not to be caught between the gears when the press rolls of the third and fourth printing unit idle.
- Laser-engraved ceramic Anilox roll advances cell characteristics. Narrow but deep engraving increases cell volume for solid and vivid printing, or delicate shades in case of shallow cells. Best to adequately scrape off the ink with a doctor blade.
- Chambered Doctor Blade System improves print quality and provides better control of ink over the print press. Best fits four-colour process printing and indispensable for fine dotted mesh to depict subtle gradation.
- Fountain Pan coated with Teflon. Non-stick coating is best for wiping excess ink from its surface area and accordingly, environmentally friendly.
- Web Leading Device guides the web through the printing section once the web winds itself around the carriage bar.
- Plate Cylinder Sleeve optimizes the process making, fixing and removing plates.
|
OUR PRODUCTS
Models 412FF, 414FF, and 417FF are the state-of-the-art stack-type flexographic printers. They have been developed and manufactured using the latest electronic technology and micron-level high-precision mechanical technology. Ceramic anilox rollers of excellent wear resistance are incorporated using the doctor blade system to realize high-precision printing. As a special order, up to 2,500 mm printing width is available.
This is a stack type flexographic printing press for printing on one side in either 2-color or 3-color print and can be used in combination with a winding machine. It is best suited for printing craft paper which is most commonly used for square bottom (SOS) bags, even in line with a bag making machine. This machine is much more economical than the conventional gravure printing machine.
● The control panel uses a touch panel for easy operation. ● It features a compact design that emphasizes operability and has a neat appearance. ● Uses a winding motor with winding diameter calculation and tension feedback methods to achieve high-precision winding tension control. Additionally, it can now run at maximum speed from the minimum winding diameter. ● The motor is used to move the plate frame, significantly shortening the forming time. ● Each color printing unit is mounted on a separate movable frame. Individual settings can be adjusted and printing plates can be replaced even during the printing process. ● Each printing plate shaft is equipped with a scale for easy print matching. ● The cross step length of the feed and take-up sections is low, improving the ease of paper jointing. ● The gear system uses helical gears to achieve a higher level of printing quality. (Barcode support is also available)
You can contact us in the
following ways！
E-mail:
Address: Room 606-1, 6/F, Block 13, No. 79 Jinshan East Road, Suzhou High-tech District, Suzhou, China
Tel:
NEWLONG Would Love To Hear Your Thoughts
NEWLONG
Headquarters address:Room 606-1, 6/F, Block 13, No. 79 Jinshan East Road, Suzhou High-tech District, Suzhou, China
