3CM-5B
Product Details
Product Specifications
| Specifications | ||
| Model | 3CM-5B | |
| Capacity※1 | 120 bags / hr max. | |
| Set weight | 20 - 30 kg / bags | |
| Bag type | Paper | |
| Bag size ※２ | Width of empty bag | 380 to 460 mm |
| Length of empty bag | 750 to 950 mm | |
| Air consumption | Approx. 300 NL / min (0.5MPa), using vacuum generator | |
| Power requirements | 1.5 kW (excl. vacuum generator) | |
| weight | 0.8 t | |
Product Dimensions
Outline Dimension Drawing
Product Details
Names of Each Part
①Feeder
Bags are placed neatly with top opening facing forward.The magazine holds approximately 50 bags.
②Pickup Unit
Bags are picked up one by one,turned 90 degrees,and set on the filling station.
③Clamping Unit
Each bag is clamped at both edges with a 30mm wide clamp.
④Bag Opening Unit
Suckers pull the bag mouth open with a vacuum generator.Timing is adjusted to each application.
⑤Filling Station
Products is smoothly filled using the expansion spout.
⑥Carrier Table and Bottom Tapper
The carrier table moves to the hopper position as filling starts.The bottom tapping plate supports and taps the bag from below to facilitate settling of product in the bag.
⑦Bag Former and Gripper
After the gussets are stretched out,the bag mouth is neatly formed and held between press bars to the hopper,and on the carrier table.The carrier table transports the bag to the closing station while being firmly gripped on both ends.
⑧Sewing Machine(DS-6AC)
The sewing machine starts operation upon detecting an approaching bag and sews it closed during traverse.The grippers release the bag and the sewing machine stops upon detecting the trailing edge of the bag.
⑨Discharge
The carrier table stops at a preset position.The bottom tapping plate inclines and the bag slides off the machine.
OUR PRODUCTS
The model EFS-22 roll tube type automatic bag making and filling machine includes bag making, product filling
Model 3CM-52T makes bags from a tubular roll of PE film instead of premade bags stacked on a bag magazine as with the model 3CM-52.
Dust generation is controlled by using the orgus spiral (packaging machine lifting device) to fill from the bottom of the bag, while maintaining a short drop distance to the powder surface inside the bag, thereby minimizing dust generation and dispersion.
Stable accuracy: Weighing and filling are performed by a suspension device with a built-in weighing sensor, enabling high-precision and stable weighing and packaging, thus eliminating the need for secondary calibration of the filling device.
Suitable for multiple varieties and can easily handle various powders, filling amounts, and other specifications. Additionally, the powder contact parts can be completely disassembled and cleaned, so there is no contamination.
You can contact us in the
following ways！
E-mail:
Address: Room 606-1, 6/F, Block 13, No. 79 Jinshan East Road, Suzhou High-tech District, Suzhou, China
Tel:
NEWLONG Would Love To Hear Your Thoughts
NEWLONG
Headquarters address:Room 606-1, 6/F, Block 13, No. 79 Jinshan East Road, Suzhou High-tech District, Suzhou, China
