3CM-5BG
Product Details
Product Specifications
| Specifications | ||
| Model | 3CM-5BG | |
| Capacity※1 | 120 bags / hr max. | |
| Set weight | 20 - 30 kg / bags | |
| Bag type | Paper | |
| Bag size ※２ | Width of empty bag | 380 to 460 mm |
| Length of empty bag | 750 to 950 mm | |
| Air consumption | 300NL/min | |
| Power requirements | 1.5 kW | |
| Weight | 0.7 t | |
Product Dimensions
Product Details
①Feeder
Place bags neatly with top opening facing front.The magazine holds approximately 50 bags.
②Pickup Unit
Bags are picked up one at a time,turned 90 degrees,and set on the filling station.
③Clamping Unit
Each bag is clamped at both edges with 30mm wide clamps.Clamping is checked to insure accuracy.
④Bag Opening Unit
Suckers pull open the bag mouth and then release using a vacuum generator.Timing is adjusted with the pickup and takeout.The clamps shift inward when the bag mouth is opened by vacuum.
⑤Filling Station
The specially designed expansion spout(conventional hopper that is turned 90 degrees)fills the product.The clamps stretch out to spread the gussets after filling.
⑥Weighing Machine
The clamp and filling station is suspended on three load cells.Auto zero adjust is performed automatically with empty bags.
⑦Carrier Table and Bottom Tapper
The carrier table moves to the hopper position as filling starts.The bottom tapping plate supports the bag from below and taps the bag to facilitate settling.
⑧Bag Former
After the gussets are fully unfolded,the bag mouth is neatly formed and held between press bars on the hopper and the carrier table.
⑨Bag Gripper
The carrier table transports the bag to the sewing head while the bag is firmly gripped from both sides.
⑩Sewing Machine(DS-7C）
The sewing head starts operation upon detecting an approaching bag.The grippers release the bag.The sewing head stops upon detecting the trailing edge of the bag.
⑪Discharge
The carrier table stops in a preset position.The bottom tapper inclines and the bag slides off the machine.
OUR PRODUCTS
Dust generation is controlled by using the orgus spiral (packaging machine lifting device) to fill from the bottom of the bag, while maintaining a short drop distance to the powder surface inside the bag, thereby minimizing dust generation and dispersion.
Stable accuracy: Weighing and filling are performed by a suspension device with a built-in weighing sensor, enabling high-precision and stable weighing and packaging, thus eliminating the need for secondary calibration of the filling device.
Suitable for multiple varieties and can easily handle various powders, filling amounts, and other specifications. Additionally, the powder contact parts can be completely disassembled and cleaned, so there is no contamination.
Bags are placed neatly with top opening facing forward.The magazine holds approximately 50 bags.
Model 3CM-5X-3 offers simple operation and elimination of jabor-intensive work, giving an improvement in process efficiency. The folder is easy to use. The filled bag is set, and the machine does the rest automatically. Folding, once heavy work, becomes an easy and efficiently accomplished job.
Model 3CM-52T makes bags from a tubular roll of PE film instead of premade bags stacked on a bag magazine as with the model 3CM-52. The compact design takes up minimum space and gives a higher speed capacity.
You can contact us in the
following ways！
E-mail:
Address: Room 606-1, 6/F, Block 13, No. 79 Jinshan East Road, Suzhou High-tech District, Suzhou, China
Tel:
NEWLONG Would Love To Hear Your Thoughts
NEWLONG
Headquarters address:Room 606-1, 6/F, Block 13, No. 79 Jinshan East Road, Suzhou High-tech District, Suzhou, China
